3m long HF edge glued panel press container loading

m

High frequency edge glued panel press is also named radio frequency edge glued panel press or rf edge gluer. It is used to lamiante finger joint panel/board or furniture solid wood panel without finger jointing.

The tradional solid wood panel laminating method is clamp carrier, which is only used screw for panel clamping. There are several disadvantages of clamp carrier:

1. Due to the elasticity of solid wood, clamp carrier cannot clamp wood twice. The clamping pressure is not big enough.

2. Clamp carrier applies top air cylinder to press the panel surface. But air cylinder pressure is also less.

3. Clamp carrier is cold press. One panel needs 30-40 mins for glue pre-curing. After releasing clamp, the panel should stay beside 24 hours for post-curing. It will waste more time and more space for stock.

High frequency is a kind of new heating method, which can let water get heated by friction. High frequency only heats glue line, which can improve the production efficiency and save the power.

1. Applies hydraulic pressure in horizontal side. Machine can compensate the pressure automaticly to make sure the panel quality

2. Vertical pressure also applies hydraulic pressure, which can gurantee the flatness of solid wood panel.

3. High frequency heating can finish solid wood panel 2-3 mins. Once the panel temperature reach to normal, the process finished. There is no need 24 hours post-curing. Save the production time and save the workshop space.

Click here for more details

News